Viking Standard Response Fusible Element Upright Sprinkler VK108 is a small thermosensitive solder link spray sprinkler available with various finishes and temperature ratings to meet design requirements. The special Polyester coatings can be used in decorative applications where colors are desired. In addition, these coatings have been investigated for installation in corrosive atmospheres and are cULus listed as corrosion resistant as indicated in Approval Chart 1. (Note: FM Global has no approval classification for Polyester Coatings as corrosion resistant.)
Technical Details
K Factor: 5.6
Manufacturer: Viking
Page: F_052214
Part Number: 12973, 05557
VK Number: VK108
Additional Information:
NOTICE: The product details indicated below are for general reference only and may vary based on the specific product approval and/or application. Always verify product details with the technical data sheet and consult with the Authority Having Jurisdiction (AHJ).
Max Pressure: 175 psi (12 bar)
Response Type: Standard
Occupancy Type: Light Hazard, Ordinary Hazard, Extra Hazard
Thread Size: 1/2" NPT (15 mm BSP)
Min Spacing: Per Standards / Listings
Max Spacing: Per Standards / Listings
Documents and Resources
Technical Data Sheets
Drawings
Revit® Files
- Viking - Standard Spray - Standard Response - Fusible Element_Revit2017
- Viking - Standard Spray - Standard Response - VK108_Revit2017
Approval Certificates
สนใจผลิตภัณฑ์ติดต่อ :
บริษัทแมสเทค ลิ้งค์ จำกัด
เบอร์ : 02-942-1433