Rotarex - Nozzle

The nozzle distributes the extinguishing agent evenly in the extinguishing zone in the calculated flooding time.

Nozzles are designed to direct the discharge of inert gas using the stored pressure from the cylinders. Nozzles

are available in 360° discharge patterns.

The nozzle selection depends on the hazard and location to be protected.

Nozzles are available with a connection thread R1 ¹⁄₂“, R1“, R¹⁄₂“ and R³⁄₄“ and can be screwed into every fitting corresponding to the pressure stage and the thread. The nozzle outlet must point downwards to distribute the extinguishing agent effectively and to prevent pollution.

Technical Details

Manufacturer: Rotarex (Luxembourg)

Connection thread : R¹⁄₂” EN 10226-1,R³⁄₄” EN 10226-1, R1” EN 10226-1,R1 ¹⁄₂” EN 10226-1

Working pressure : 60 bar at 15ºC

Length :

• R¹⁄₂” EN 10226-1 = 48mm.
• R³⁄₄" EN 10226-1 = 59mm.
• R1” EN 10226-1 = 75mm.
• R1¹⁄₂ EN 10226-1 = 104mm.

Material nozzle body : Brass

Conformity : Vds

Approved : UL/FM

Documents and Resources

Technical Data Sheets

•  Technical Data Sheet

สนใจผลิตภัณฑ์ติดต่อ :
บริษัท คิดดี ไฟร์ โซลูชั่น จำกัด
เบอร์ : 02-986-5883
E-mail :  info@kiddeefire.com