Naffco - Nozzle

The nozzle is used to discharge the agent from the cylinder through piping network to the enclosed hazard volume.

The nozzle selection depends on the hazard and location to be protected.

The nozzle has to be mounted at the ceiling level with the orifice tip pointed vertically down.

The nozzle outlet must point downwards to distribute the extinguishing agent effectively and to prevent pollution.

The discharge pattern of the nozzle shall be 360°.

The nozzle distributes the extinguishing agent evenly in the extinguishing zone in the calculated flooding time.

Nozzles are designed to direct the discharge of inert gas using the stored pressure from the cylinders.

Technical Details

Manufacturer: Naffco (United Arab Emirates, UAE)

Thread : EN 10226-1

Size : R¹⁄₂, R³⁄₄, R1, R1¹⁄₂

Orifice Diameter :

• Ø3-Ø9.5 mm
• Ø7-Ø13.5 mm
• Ø10-Ø17.5 mm
• Ø15-Ø25.5 mm

Material : Brass

Working Pressure : 60 Bar

Approvals : UL Listed.

Documents and Resources

Technical Data Sheets

•  Technical Data Sheet 1

•  Technical Data Sheet 2

สนใจผลิตภัณฑ์ติดต่อ :
บริษัท คิดดี ไฟร์ โซลูชั่น จำกัด
เบอร์ : 02-986-5883
E-mail :  info@kiddeefire.com